Pentium III Coppermine (Socket 370):
SBC-678
Features
Support Intel® Pentium® III or Celeron™ processor with FSB up to 133MHz, special space reserved for high performance Pentium® III processor
Support PC100/133 SDRAM memory up to 512MB (max.)
On board dual 10/100 Base-T Ethernet
Integrated 3D graphic controller (DVMT, 4Mbyte display cache)
Support two DMA/33/66/100 IDE
Support ATX function with WOL, Modem-Ring On, K/B & Mouse wake-up
Hardware monitoring & Watch-Dog Timer for system protection
Specifications
CPU :
Intel Pentium III processors up to 1GHz
Intel Celeron processors up to 700MHz
Memory :
Two SDRAM sockets for upto 512M
BIOS :
AMI® BIOS
Chipset :
Intel® 815E chipset
On-Board VGA :
Intel® 82815 (GMCH) chipset integrated with Graphics controller
Hardware motion compensation assist for software MPEG/DVD decode
15 pin CRT connector x 1
Optional TFT LCD/DSTN LCD/CRT control module through proprietary connector
On-Board Ethernet :
Intel® 82559 PCI fast Ethernet controller
Dual RJ-45 connector located at rear panel
Support IEEE 802.3 auto-negotiation algorithm of full-duplex and half-duplex operation for 10Mb/s and 100Mb/s (NWAY)
On-Board SCSI :
Adaptec AIC 7892 SCSI controller to support Ultra III SCSI transfer rate up to 160MB/s via Daughter board
Bus Speed :
100Mhz/133Mhz
USB :
Two USB
Watchdog Timer :
Programmable
Disk-On-Chip :
Upto 288M
IDE Interface :
Support up to 4 drives
Primary Master/Slave, Secondary Master/Slave
Support PIO Mode 4
DMA66/100
FDD Interface :
One FDD channel for 2 FDD
Serial Port :
Two Serial Ports
Parallel Port :
Supports SPP/ECP/EPP
Keyboard :
PS/2
Mouse :
PS/2
Power Consumption (Max) :
+5V@7A, +12V@200mA, -12V@20mA
Operating Temperature :
Operating temperatures:0°C to 55°C
Storage temperatures: -20°C to 75°C
Relative humidity: 10% to 90% (Non-condensing)
Board Size :
13.26" (L) x 4.8" (W)
Other Features :
One IrDA infrared port
