9" Rack Mount Monitor (Mono) : BRM-9 This space saving rack mount monochrome SVGA monitor is PC/AT compatible. It is mounted in a rugged ventilated aluminum enclosure mated to an aluminum front panel. The overall height of only 8.75 inches allows these monitors to fit into space restricted rack openings. A 56CFM fan located on the rear panel draws air through a removable filter to assure cool monitor operation. A tinted Lexan shield protects the screen and seals it from dirt and moisture. The BRM-9 is VGA compatible and accepts R.G.B. analog video signals through a 15-pin male VGA cable. Features Tinted Lexan shield protects monitor screen. All operator controls located on front panel behind door. Signal and power cables provided with monitor. Provisions for optional slide mounting. Built-in power saving feature. Specifications Dimensions: 19.0" (W) x 8.75" (H) x 15.125" (D) Weight: 20 lbs CRT: 9" Mono SVGA, 90 degree deflection, non-glare. Paper White Phospher. Resolution: 1024 x 768 (SVGA), 640 x 480 (VGA) Frequency: Horizontal: 30 ~ 38 KHz. Vertical: 50 ~ 90 Hz. Bandwidth: 45 MHz. Video Input: Analog RGB 0.7 Vp-p Video Connector: 15-pin D-sub connector User Controls: Brightness, Contrast, Power Switch Power: AC Input: 100VAC ~ 240VAC Frequency: 50/60 Hz Power Consumption: 35 Watts Max. Environment: Temperature: Operating: 0 to 40 degrees C Storage: -20 to +60 degrees C Humidity: Operating: 30% to 80% RH Storage: 10% to 90% RH